ASCO RedHat II 8210G014 1" NPT Normally Open Solenoid Valve 120VAC NOS
NC009a
Genuine ASCO RedHat II 8210G014 2-way normally open industrial solenoid valve with 1" NPT brass valve body and 120V/60Hz coil. This is a desirable industrial replacement/spare valve for equipment and fluid-control systems requiring the exact ASCO 8210G014 configuration.
Included are the ASCO 8210G014 brass valve body, ASCO MP-C-080 solenoid coil marked P/N 272610-032-D and 120/60 FT, the loose spring/retainer shown in the photos, original ASCO RedHat box, and original installation and maintenance instruction sheets. Box label is marked (1) 4EKY9, T 180614, 8210G014, 120/60, and Product of Mexico.
Buyer should verify model number, voltage, pipe size, operating requirements, and application compatibility before purchase.
Sold as is. No warranty from the Seller. No Returns.
SKU: NC009
CONDITION: New old stock/open-box ASCO valve from stored industrial inventory. The brass valve body and 1" threaded ports appear unused, with clean internal surfaces and no visible installation residue. Exterior brass shows light tarnish, discoloration, rub marks, and handling/storage marks. Coil is detached as shown and has wire leads with stripped ends; spring, instructions, and original box are included. Box has substantial shelf/storage wear, dirt, tape residue, writing, and torn/flared flaps. Functional operation is unverified. See all detailed pictures and read the full detailed description provided by the seller to know what you are purchasing.
Key Features / Specifications
The current Grainger listing for 4EKY9 / 8210G014 confirms the principal specifications below.
Item type: Industrial electrically operated solenoid valve
Manufacturer: ASCO / RedHat
Model: 8210G014
Grainger item number: 4EKY9
Series: ASCO 210 / legacy 8210 Series
Configuration: 2-way, 2-position
Normal state: Normally Open — valve remains open when de-energized and closes when energized
Actuation: Internally pilot operated
Body material: Brass
Nominal pipe size: 1"
Connections: Female threaded NPT/NPTF-type inlet and outlet
Orifice: 1"
Flow coefficient: Cv 13
Seal material: NBR/Buna-N
Coil: ASCO MP-C-080
Coil part number: 272610-032-D
Voltage: 120VAC
Frequency: 60Hz
Coil power: 16.1W
Minimum operating pressure differential: 5 PSI
Maximum differential, water: 150 PSI
Maximum differential, air/inert gas: 150 PSI
Maximum differential, light oil: 125 PSI
Maximum fluid temperature: 180°F
Listed media: Water, air, inert gases and light oil
Coil enclosure: Watertight
IP rating: IP66
NEMA ratings listed: 1, 2, 3, 3S, 4 and 4X
UL listed
Manufacturer/distributor listed assembled dimensions: approximately 8-1/8" H × 5" L × 4-21/32" W
Grainger specifically states this model is not intended for potable-water applications.
The 272610-032-D replacement coil itself is still commercially available; current listings identify it as a 120VAC/60Hz, 16.1W, Class F watertight coil.
Manufacturer Background
ASCO is a long-established industrial fluid-control manufacturer whose current product line is part of Emerson's discrete-automation portfolio. Emerson describes the ASCO Series 210, also known as 8210, as its economical high-flow general-service solenoid-valve family for liquid and air/inert-gas applications.
ASCO has a particularly strong reputation in industrial solenoid valves.
Country of Manufacture
Mexico — for this specific valve.
Release Date / Approximate Age
Likely 2018 production based on original box trace/date code T180614
The box code “T 180614” plausibly represents June 14, 2018, which would make the valve approximately 8 years old in 2026. However, I could not verify an official ASCO public date-code decoder establishing that interpretation. The coil also carries T1503, which appears to be a separate production/trace code.
Included are the ASCO 8210G014 brass valve body, ASCO MP-C-080 solenoid coil marked P/N 272610-032-D and 120/60 FT, the loose spring/retainer shown in the photos, original ASCO RedHat box, and original installation and maintenance instruction sheets. Box label is marked (1) 4EKY9, T 180614, 8210G014, 120/60, and Product of Mexico.
Buyer should verify model number, voltage, pipe size, operating requirements, and application compatibility before purchase.
Sold as is. No warranty from the Seller. No Returns.
SKU: NC009
CONDITION: New old stock/open-box ASCO valve from stored industrial inventory. The brass valve body and 1" threaded ports appear unused, with clean internal surfaces and no visible installation residue. Exterior brass shows light tarnish, discoloration, rub marks, and handling/storage marks. Coil is detached as shown and has wire leads with stripped ends; spring, instructions, and original box are included. Box has substantial shelf/storage wear, dirt, tape residue, writing, and torn/flared flaps. Functional operation is unverified. See all detailed pictures and read the full detailed description provided by the seller to know what you are purchasing.
Key Features / Specifications
The current Grainger listing for 4EKY9 / 8210G014 confirms the principal specifications below.
Item type: Industrial electrically operated solenoid valve
Manufacturer: ASCO / RedHat
Model: 8210G014
Grainger item number: 4EKY9
Series: ASCO 210 / legacy 8210 Series
Configuration: 2-way, 2-position
Normal state: Normally Open — valve remains open when de-energized and closes when energized
Actuation: Internally pilot operated
Body material: Brass
Nominal pipe size: 1"
Connections: Female threaded NPT/NPTF-type inlet and outlet
Orifice: 1"
Flow coefficient: Cv 13
Seal material: NBR/Buna-N
Coil: ASCO MP-C-080
Coil part number: 272610-032-D
Voltage: 120VAC
Frequency: 60Hz
Coil power: 16.1W
Minimum operating pressure differential: 5 PSI
Maximum differential, water: 150 PSI
Maximum differential, air/inert gas: 150 PSI
Maximum differential, light oil: 125 PSI
Maximum fluid temperature: 180°F
Listed media: Water, air, inert gases and light oil
Coil enclosure: Watertight
IP rating: IP66
NEMA ratings listed: 1, 2, 3, 3S, 4 and 4X
UL listed
Manufacturer/distributor listed assembled dimensions: approximately 8-1/8" H × 5" L × 4-21/32" W
Grainger specifically states this model is not intended for potable-water applications.
The 272610-032-D replacement coil itself is still commercially available; current listings identify it as a 120VAC/60Hz, 16.1W, Class F watertight coil.
Manufacturer Background
ASCO is a long-established industrial fluid-control manufacturer whose current product line is part of Emerson's discrete-automation portfolio. Emerson describes the ASCO Series 210, also known as 8210, as its economical high-flow general-service solenoid-valve family for liquid and air/inert-gas applications.
ASCO has a particularly strong reputation in industrial solenoid valves.
Country of Manufacture
Mexico — for this specific valve.
Release Date / Approximate Age
Likely 2018 production based on original box trace/date code T180614
The box code “T 180614” plausibly represents June 14, 2018, which would make the valve approximately 8 years old in 2026. However, I could not verify an official ASCO public date-code decoder establishing that interpretation. The coil also carries T1503, which appears to be a separate production/trace code.